Our Projects
Real attics we've insulated across South Florida. Every job is photographed at full depth before we leave, and you get the same photos for your own attic.
Recent Attic Insulation Jobs
Blown-in insulation installed at full depth, corner to corner, around the ducts and framing. No thin spots, no gaps.
Blown-in attic insulation
Fresh blown-in fiberglass at full depth across the whole attic floor, worked cleanly between the trusses.
Blown-in insulation around ductwork
Even coverage around the AC ducts and framing, so no section of the ceiling is left thin.
Blown-in attic insulation
Full-depth pink fiberglass laid evenly up to the duct runs and framing, corner to corner.
Blown-in attic insulation
A deep, even blanket of white blown-in fiberglass between the joists, right up to the attic deck.
Blown-in attic insulation
One even blanket at full depth, corner to corner, covering the bottom of every truss.
Attic air sealing
Every gap along the top plates and framing sealed with foam before the insulation goes in, so air stops leaking through the ceiling.
What Our Thermal Inspection Shows
Every free inspection starts with a thermal scan of your ceilings, taken from inside the house with the AC running.
In this example scan, the same ceiling reads 84°F along a strip where the insulation above was pushed aside, and 70°F where it's doing its job. That 14° gap is heat your AC fights all afternoon.
Then we go up and measure the actual depth, so you see the problem and the reason for it.
Want Your Attic to Look Like This?
It starts with a free attic inspection. We scan your ceilings with a thermal camera, measure the insulation that's up there now, and give you one straight price. Serving Sunrise, Plantation and all of Broward County.
Book Your Free Inspection